Canon Oce PlotWave 450 Operation Manual Download Page 34

Page: 34 / 330

The folding device (optional)

Introduction

The printer can be delivered with an integrated folding device.

The Océ PlotWave 450/550 is compatible with the Océ PlotWave folder.

The Océ PlotWave folder

The Océ PlotWave folder can be used with a reinforcement unit and belt unit.

A technician is required to install the folder and configure the system.

For more information on the folder, see

Use the Folder on page 215

The folding device (optional)

Chapter 2 - Get to Know the Printing System

Summary of Contents for Oce PlotWave 450











































































































































































































































































































































Search results

Summary of Contents for Oce PlotWave 450

Reviews:

Related manuals for Oce PlotWave 450

Brands by name

Popular brands

Canon Oce PlotWave 450, Operation Manual

Search results

Summary of Contents for Oce PlotWave 450

Reviews:

Related manuals for Oce PlotWave 450

Brands by name

Popular brands