Canon Oce BLM550+, Operation Manual

Page: 10 / 138

Introduction
Introduction
This User Manual is applicable to all model Océ BLM550
+
booklet makers from serial number
0800 onwards with software version 4.x. You can attach the optional Book Stacker to the Océ
BLM550
+
booklet maker. It is possible to retrofit the optional Book Stacker to the Océ BLM550
+
models.
CAUTION
A CAUTION message tells you that a procedure or operation can be dangerous. To prevent
injury, you must follow the instructions.
IMPORTANT
An IMPORTANT message tells you that a procedure or operation can damage the machine or the
product. To prevent damage, you must follow the instructions.
Documentation
Your Manual
The User Manual for the Booklet maker describes how to perform these tasks:
• Operate the Booklet maker
• Find and correct error conditions
• Perform normal maintenance tasks
Operator training is given when the Booklet maker is installed. To make sure you use your
Booklet maker correctly, read your manual.
The User Manual for the Booklet maker does not describe the operation of the printer. If needed,
refer to your printer user manual.
Safety Information
Safety information is included in the separate “Safety Information Manual.” Read the safety
information before you use your Booklet maker.
Installation
Your Booklet maker must be installed by a service engineer. Special knowledge is needed to
install the machine.
IMPORTANT
Only connect the machine to a mains power supply of the correct voltage with a good earth
connection. The correct machine voltage is shown on the label at the power supply input on the
rear of the machine. If the machine is connected to the wrong supply, the warranty is voided.
How to Get Help
If you have any questions or problems, refer to the problem solving section in this manual (
Error
Conditions, Problems and Solutions on page 59 ). Contact your Booklet maker supplier for
further help.
Introduction
10 Chapter 2 - Introduction to the Booklet maker