Canon oce 31x5e, Daily Maintenance

Page: 29 / 137

Introduction 29
Accessing the Océ 31x5E Network Copier
You can use the Network Copier for copying, printing and scanning. When
using the Network Copier for copying, you must access the ‘Copy’ mode of
the machine, in which you can define settings for copy jobs. The ‘Print’ mode
is used for defining settings which apply to print jobs, whereas the ’Scan
mode’is used for scanning documents.
After starting up, the copier will be in initial mode, which by factory default is
the ‘Copy’ mode (see ‘Standard settings’ on page 14). If the Océ 31x5E is to
be used mainly for printing jobs, the key operator can change the initial mode
to ‘Print’ mode. The operator can also set the initial mode to ’Scan’ if scanning
is to be the main activity.
You can switch from one mode to another by pressing the left-most function
button, which is called the application button (see figure 5 on page 16). The
machine will always finish the current job before you can start a new job.
When you send an automatic print job, the machine will automatically switch
to printing, provided that the machine is not busy with another type of job.
For stopping or interrupting a copy or print job, see ‘Stopping a job’ on
page 31.