Canon NP6621, Service Handbook, Page: 27 / 146

2–13
STANDARDS AND ADJUSTMENTS
23 Positioning the Paper Deflecting
Plate Solenoid (SL8)
Loosen the two screws
q
, push the solenoid
plunger to the arrow until the pin
e
reach to the
bottom of slot, and fix the screw.
Figure 2-235
24 Setting the Deck Size
To change the paper deck size, change the
position of the guide plate at the front, rear, and rear
left.
1) Slide out the deck toward the front until it stops.
2) Remove the mounting screw from the guide
plate at the front, rear, and rear left; then, detach
the guide plates.
Figure 2-236
22 Assembling the Mirror Position-
ing Tool
1) Remove the screw from position B indicated in
Figure 2-233.
Figure 2-233
2) Fit the screw removed in step 1) in position A;
then, tighten it slightly.
3) Spread the arm out of the main frame until it
comes into contact with the stopper as indi-
cated in Figure 2-234.
4) Fix the screw in place.
Figure 2-234
Note:
Shortest pin not used.
A
A
B
B
Position B
Longest pin
Medium-Length pin
A
A
B
B
Position A
2 1
3
Screw
Screw
Screw
Guide plate (front)
Guide plate (left)
Guide plate (rear)