E. Fixing System
1
Points to Note When Installing the Fixing Heater
a. Do not touch the surface of the heater.
b. One of the terminals (lead wire
q
) of the sub heater is a round terminal
w
. Both
terminals of the main heater are fastons
e
.
<Main Heater>
The longer lead wire must be at the front of the copier.
Figure 2-48
<Sub Heater>
The round terminal must be at the rear of the copier. The fastons must be at the front
of the copier.
Figure 2-49
c. Insert the main heater to the right side (pick-up side) and the sub heater to the left
side (delivery side) when viewing from the front of the fixing assembly.
Figure 2-50
2-34
CHAPTER 2 STANDARDS AND ADJUSTMENTS
q
e
q
w
Sub heater
Main heater
Upper fixing roller
(delivery side)
(pick-up side)
