Canon Nagel, Service Support Manual

Page: 12 / 12

Nagel Finisher Service Support Guide
Nagel Finisher Service Support Guide Rev. 0 September 2001 Page 8
VII. Technical Training
A. Certification, Availability and Prerequisite
Technicians will be trained and certified in the Nagel Finisher two-day In-
House Training Classes held at the Canon Regional Training Centers. The
prerequisite for this class is CLC 5000 series course. Contact your Canon
Regional Training Center or the Canon on-line technical e-Support Center for
specific class schedules and location.
B. Course Description
The two-day service training agenda will encompass the unique functions
and servicing procedures of the Nagel Finisher. Upon completion of the
two-day training program, the student will have acquired the skills to be
able to:
1. Install the Nagel Finisher and Software
2. Operate the CLC 5000 utilizing the Nagel Finisher
3. Answer customer questions regarding features or functionally
4. Perform general maintenance procedures
5. Troubleshoot the Nagel Finisher
A Nagel Finisher Service Manual will be distributed to each technician at
the beginning of class.
C. Materials
Nagel Finisher service materials may by ordered by telephoning the Parts
Order Desk at
1-732-521-7230 or by fax 1-800-258-0900.
Item Part Number
2
Nagel Finisher Service Manual DU7-1103-000
Nagel Finisher Parts Catalog DU7-3105-000
VIII. Service Requirements
A. Authorization Policy
In order to become authorized and maintain your authorization to service
the Nagel Finisher, each dealer location must employ a minimum of one
technician. Failure to maintain an adequate number of technicians can
cause cancellation of the location’s authorized status. As a result of being
authorized, the location is ultimately responsible for the service provided for
units that are placed by personnel working out of that authorized location.
Canon USA strongly recommends that each dealership location also have
at least one System Engineer (SE) to aid the technicians in the field to
properly support the customer’s System, especially for computers and
computer networks.