Canon MX920 series Online Manual Download Page 92

Page: 92 / 267

ScanGear (Scanner Driver) Does Not Start

Check 1: Make sure that MP Drivers is installed.

If not installed, install MP Drivers using the Setup CD-ROM.

Check 2: Select your scanner or printer on the application's menu.

Important

If your scanner or printer name is displayed multiple times, select the one that does not include WIA.

Note

The operation may differ depending on the application.
Use the WIA driver when scanning from a WIA-compliant application.

Scanning with WIA Driver

Check 3: Make sure that the application is TWAIN-compliant.

You cannot open ScanGear (scanner driver) from applications not supporting TWAIN.

Check 4: Scan and save images with IJ Scan Utility and open the files in
your application.

Summary of Contents for MX920 series












































































































































































































































































Search results

Summary of Contents for MX920 series

Reviews:

Brands by name

Popular brands

Canon MX920 series, Online Manual

Search results

Summary of Contents for MX920 series

Reviews:

Brands by name

Popular brands