manualshive.com logo in svg

Canon MX920 series, Online Manual

Share
Download
Canon MX920 series Online Manual Download Page 162

1312

Cause

The paper loaded in the cassette (lower) is jammed.

Action

If the paper loaded in the cassette (lower) is jammed, remove the paper following the procedure below.

Important

The power cannot be turned off while the machine is sending or receiving a fax, or when the received

fax or the unsent fax are stored in the machine's memory.
Make sure if the machine completed sending or receiving all the faxes before disconnecting the power
cord.
If you unplug the power cord, all the faxes stored in the machine's memory are deleted.

Note

If you need to turn off the machine to remove jammed paper during printing, press the 

Stop

 button to

cancel print jobs before turning off the machine.

1.

Detach the rear cover.

Pull out the rear cover.

2.

Pull out the paper slowly.

Note

Do not touch the inner parts of the machine.
Open the paper output tray if you cannot pull out the paper.

3.

Attach the rear cover.

Insert the rear cover to the back of the machine.

Summary of Contents for MX920 series












































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands