Canon MX720 Series Online Manual Download Page 87

Page: 87 / 248

Inserting the USB Flash Drive

Printable Image Data

This machine accepts images taken with a camera compliant with the Design rule for Camera File

system (Exif 2.2/2.21/2.3 compliant), TIFF (Exif 2.2/2.21/2.3 compliant). Other image or movie types
such as RAW images cannot be printed.

The machine accepts images scanned and saved with the machine when

Doc.type

is set to

Photo

and

Format

is set to

JPEG

(file extension ".jpg").

Note

This device incorporates exFAT technology licensed from Microsoft.

Before inserting the USB flash drive

If your USB flash drive cannot be inserted into the USB flash drive port of the machine, you may be

required to use an extension cable for the USB flash drive. Purchase it at electronics retail stores.

Some USB flash drives may have recognition problem, and these devices may not guarantee proper

operation of the machine.

You may not be able to use USB flash drives with security function.

Insert the USB flash drive into the USB flash drive port.

Make sure that the USB flash drive is correctly oriented before inserting it straightforward into the USB
flash drive port.

Summary of Contents for MX720 Series

























































































































































































































































Search results

Summary of Contents for MX720 Series

Reviews:

Canon MX720 Series, Online Manual, Page: 87 / 248

Search results

Summary of Contents for MX720 Series

Reviews: