manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 39 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 39

Operation Panel

* All buttons and lamps on the operation panel are shown lit in the illustration below for explanatory
purposes.

(A)

 Displaying select/set buttons

(B)

 Displaying Numeric buttons

 Note

 Buttons available depending on the operation will be displayed on the operation panel. When

specifying the number of copies for photo printing or coping, or selecting options in the print
settings screen, the select/set buttons will be displayed as shown in 

(A)

. When entering fax/

telephone numbers for dialing or entering characters/numbers in user information, the Numeric
buttons are displayed as shown in 

(B)

. You can use only the buttons displayed.

(1)

 ON button

Turns the power on or off. Before turning on the power, make sure that the document cover is
closed.

Turning the Machine On and Off

(2)

 COPY button

Switches the machine to the copy mode, which lets you make copies while changing
magnification, copy layout, etc.

(3)

 FAX button

Switches the machine to the fax mode, which lets you send faxes, print received faxes, and print
reports.

(4)

 LCD (Liquid Crystal Display)

Displays messages, menu items, and the operational status. You can also preview photos on a
USB flash drive before printing.

Confirming that the Power Is On

(5)

 Redial/Pause button

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments