Canon MX720 Series Online Manual Download Page 206

Page: 206 / 248

Wired LAN Sheet

Note

This screen is not available depending on the printer you are using.

Allows you to set the printer with wired LAN connection.
To display the

Wired LAN

sheet, click the

Wired LAN

tab on the

Configuration

screen.

TCP/IP Setup:

Sets the IP address of the printer to be used over the LAN. Set a value appropriate for your
network environment.

Get IP address automatically

Select this option to use an IP address automatically assigned by a DHCP server. DHCP server
functionality must be enabled on your router.

Use next IP address

If no DHCP server functionality is available in your setup where you use the printer or you want
to use a particular IP address, select this option to use a fixed IP address.

Summary of Contents for MX720 Series

























































































































































































































































Search results

Summary of Contents for MX720 Series

Reviews:

Canon MX720 Series, Online Manual, Page: 206 / 248

Search results

Summary of Contents for MX720 Series

Reviews: