manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 172 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 172

Connecting to Other Computer with LAN/Changing the
Connection Method from USB to LAN

To add the computer connecting the printer with LAN or to change the connection method between
the printer and the computer from USB to LAN, setup with the Setup CD-ROM.

Connecting to Other Computer with LAN

To add the computer connecting the printer with LAN, insert the Setup CD-ROM into the computer to
connect with LAN and setup the network setting.

Changing the Connection Method from USB to LAN

To change the connection method between the printer and the computer from USB to LAN, setup
with the Setup CD-ROM.
To change the connection method, insert the Setup CD-ROM into the computer to connect with LAN
and select 

Change Connection Method

 to setup.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments