manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 164 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 164

About ECO settings

You can set automatic duplex printing as a default.
Follow the procedure below to perform setting.

1.

Make sure that the machine is turned on.

Confirming that the Power Is On

2.

Press the 

MENU

 button.

The menu screen is displayed.

3.

Select 

 

ECO settings

 then press the 

OK

 button.

4.

Use the 

 button to change the setting item, use the 

 button to change the

setting, then use the 

OK

 button to confirm the selection.

1.

Copy

Sets two-sided copying as a default.

2.

PDF file print

Sets two-sided printing of PDF files saved on a USB flash drive as a default.

3.

Template print

Sets two-sided printing of template forms on the machine as a default.

4.

FAX print

Sets two-sided printing of sent/received faxes, reports, or lists as a default.

Important

Under the conditions below, faxes are printed in single-sided even when 

ON

 is selected.

when color faxes are received
when 

Legal

 is selected for 

Page size

 on 

FAX paper settings

.

Note

When two-sided printing is selected, the 

 icon is displayed on the menu screen or on each

print setting screen.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments