manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 162 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 162

Firmware update

You can update the firmware of the machine, check the firmware version, or perform settings of a DNS
server and a proxy server.

Note

Only 

Check current version

 is available when 

Disable LAN

 is selected for 

Change wireless/wired

in 

LAN settings

.

•

Install update

Performs the firmware update of the machine. If you select 

Yes

, the firmware update starts. Follow the

on-screen instructions to perform update.

Important

When you use this function, make sure that the machine is connected to the Internet.
If the firmware update is carried out, all faxes stored in the machine's memory are deleted.
You cannot start the firmware update under the following conditions:

While the machine is sending or receiving a fax
While the machine is storing the unprinted fax in machine's memory (memory reception)
When the unsent faxes are stored in the machine's memory

Note

If the firmware update is not complete, check the following and take an appropriate action.

When using wired LAN, make sure that the machine is connected to the computer with a

LAN cable properly.

Check the network settings such as an access point or a router.
If 

Cannot connect to the server.

 is displayed on the LCD, press the 

OK

 button, then try

again after a while.

•

Check current version

You can check the current firmware version.

•

DNS server setup

Performs settings for a DNS server. Select 

Auto setup

 or 

Manual setup

. If you select 

Manual setup

,

follow the display on the LCD to perform settings.

•

Proxy server setup

Performs settings for a proxy server. Follow the display on the LCD to perform settings.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments