manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 152 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 152

Print settings

•

Prevent paper abrasion

Use this setting only if the print surface becomes smudged.

Important

Be sure to set this back to 

OFF

 after printing since it may result in lower printing speed or lower

print quality.

•

Extended copy amount

Selects the amount of image that extends off the paper when printing in borderless (full).
Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page. You
can change the width to be cropped from the borders of the original image as needed.
Cropped area will be larger if 

Extended amount: Large

 is selected.

Important

This setting can be applied under the following conditions:

- performing borderless copying
- Borderless is selected for Border when copying printed photos

Note

If printouts contain margins even though you are printing in Borderless, specifying 

Extended

amount: Large

 for this setting may help solve the problem.

•

Auto photo fix setting

When 

ON

 is selected, you can select whether to print photos using the Exif information recorded in the

image files in the following cases.

•

Auto photo fix

 is selected for 

Photo fix

 when printing from a USB flash drive.

• When 

Auto photo fix

 is selected for 

Photo fix

 in printing a photo in online photo album.

• The print setting on the PictBridge compliant device is set to 

Default

* or 

On

 when printing with a

PictBridge compliant device.
* When 

Default

 is selected for the print setting on the PictBridge compliant device, select 

Auto

photo fix

 for 

Photo fix

 in 

PictBridge print settings

.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments