Canon MX720 Series Online Manual Download Page 147

Page: 147 / 248

Changing the Machine Settings on the LCD

This section describes the procedure to change the settings in the

Device settings

screen, taking the

steps to specify

Extended copy amount

as an example.

Make sure that the machine is turned on.

Confirming that the Power Is On

Press the

MENU

button.

The menu screen is displayed.

Select

Setup

, then press the

button.

Select

Device settings

, then press the

button.

The

Device settings

screen is displayed.

Use the

button to select the setting item, then press the

button.

The setting screen for the selected item is displayed.

Use the

button to select the menu, then press the

button.

Use the

button to select the setting item, then press the

button.

Summary of Contents for MX720 Series

























































































































































































































































Search results

Summary of Contents for MX720 Series

Reviews:

Canon MX720 Series, Online Manual, Page: 147 / 248

Search results

Summary of Contents for MX720 Series

Reviews: