manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 136 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 136

Cleaning the Protrusions inside the Machine

 Important

 Be sure to turn off the power and disconnect the power plug before cleaning the machine.

- The power cannot be turned off while the machine is sending or receiving a fax, or when unsent

faxes are stored in the machine's memory. Make sure if the machine completed sending or
receiving all the faxes before disconnecting the power plug.

- The machine cannot send or receive faxes when the power is turned off.
- If the power plug is disconnected, the date/time settings will be reset and all documents stored in

the machine's memory will be lost. Send or print a necessary document, or save it on a USB flash
drive before disconnecting the power plug.

You need to prepare: cotton swab

If the protrusions inside the machine are stained, wipe off any ink from the protrusions using a cotton swab
or the like.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments