Canon MX720 Series Online Manual Download Page 103

Page: 103 / 248

Examining the Nozzle Check Pattern

Examine the nozzle check pattern, and clean the print head if necessary.

Check if there are missing lines in the pattern

(1)

or horizontal white streaks in the

pattern

(2)

(A)

No missing lines/No horizontal white streaks

(B)

Lines are missing/Horizontal white streaks are present

(C)

Number of sheets printed so far

Select the pattern that is closer to the printed nozzle check pattern on the
confirmation screen.

For

(A)

(no missing lines or no horizontal white streaks) in both the pattern

(1)

and pattern

(2)

(1)

The cleaning is not required. Select

All A

, then press the

button.

(2)

Confirm the message, then press the

button.

The screen will return to the

Maintenance

screen.

Summary of Contents for MX720 Series

























































































































































































































































Search results

Summary of Contents for MX720 Series

Reviews:

Canon MX720 Series, Online Manual, Page: 103 / 248

Search results

Summary of Contents for MX720 Series

Reviews: