Checking the Ink Status with the LCD on the Machine
Note
• The ink level detector is mounted on the machine to detect the remaining ink level. The machine
considers as ink is full when a new FINE cartridge is installed, and then starts to detect a remaining ink
level. If you install a used FINE cartridge, the indicated ink level of it may not be correct. In such case,
refer to the ink level information only as a guide.
• When remaining ink cautions or errors occur, the message will appear to inform you of the error. Take
appropriate action according to the message.
1. Make sure that the power is turned on, and press the
Setup
button.
The
Setup menu
screen will appear.
2. Use the or button to select
Ink information
, then press the
OK
button.
3. Use the or button to select
Remaining ink
, then press the
OK
button.
Remaining ink is shown in the area (A).
Example:
The ink is running low. Prepare a new ink cartridge.
Note
• To print the model number of the FINE cartridge, select
Ink information
from
Setup menu
, then
select
Print ink number
.
• You can also check the ink status on the LCD when you press the
COPY
,
FAX
,
SCAN
, or
Setup
button. The current remaining ink level will be displayed on the LCD for a few seconds.
• You can also check the ink status on the computer screen.
Checking the Ink Status from Your Computer
152
Summary of Contents for MX530 series
