manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 928

In the example used for this explanation, the model name is set to "MX520 series".

When a model other than "MX520 series" is used, whatever appears in place of "MX520" becomes the
model name use.

Ex:

When you select 

MX520 series-2

, the printer name displayed on the Bluetooth device is 

Canon MX520

series-2

.

The initial value is set to 

MX520 series-1

.

•

Graphic LCD

•

Text LCD

Access refusal setting (Graphic LCD)/Access refusal (Text LCD) Screen

When you search from a Bluetooth device, you can enable or disable the display of the printer name.

•

ON (Graphic LCD)/ON (Text LCD)

Disables searching from a Bluetooth device.

•

OFF (Graphic LCD)/OFF (Text LCD) (Default setting)

Enables searching and printing from a Bluetooth device.

Security settings (Graphic LCD)/Security settings (Text LCD) Screen

•

Enable (Graphic LCD)/Enable (Text LCD)

Selecting 

Enable

 (Graphic LCD)/

Enable

 (Text LCD) allows you to choose either of the security modes

below.

•

Mode 3(recommended)

 (Graphic LCD)/

Mode 3 (recommend)

 (Text LCD)

This mode is activated on link level enforced security.
The passkey will be required when a Bluetooth device communicates with the printer. Normally
select this mode.

•

Mode 2

 (Graphic LCD)/

Mode 2

 (Text LCD)

This mode is activated on service level enforced security.
The passkey will be required when printing through the Bluetooth communication.

After setting the security mode, we recommend making a trial print through Bluetooth communication.
If printing does not start, change the security mode and try again.

Setting a passkey will prevent unwanted access from other Bluetooth devices. You can change the
passkey on the 

Change passkey

 (Graphic LCD)/

Passkey

 (Text LCD) screen.

•

Disable (Graphic LCD)/Disable (Text LCD) (Default setting)

When you register the printer, you are not required to input a passkey.

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands