manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 894

Printing Photographs Directly from a PictBridge Compliant
Device

You can connect a PictBridge compliant device such as a digital camera, camcorder, or mobile phone to
the machine through LAN, and print recorded images directly without using a computer.

Connectable devices:

PictBridge compliant device that is connectable with LAN

Printable image data format:

The machine accepts images* taken with a camera compliant with the Design rule for Camera File system
and PNG files.

* Exif 2.2/2.21/2.3 compliant

Important

LAN connection with the machine is required to use this function.
You cannot print even if the machine is connected to the PictBridge compliant device using a USB

cable.

Note

PictBridge is the Standard to print your photos directly without using a computer, connecting a device

such as a digital still camera, digital camcorder, or camera-equipped mobile phone.

 (PictBridge): A PictBridge compliant device has this mark.

When printing photos with the PictBridge compliant device connected to the machine, we recommend

the use of the AC adapter supplied with the device. If you are using the device battery, be sure to
charge it fully.

Depending on the model or brand of your device, you may have to select a print mode compliant with

PictBridge before connecting the device. You may also have to turn on the device or select Play mode
manually after connecting the device to the machine.
Perform necessary operations on the PictBridge compliant device before connecting it to this machine
according to instructions given in the device's instruction manual.

Depending on your PictBridge compliant device, you can print on the label side of discs.

However, you cannot print on 3.15 inches / 8 cm printable discs.

1.

Make sure that the machine is turned on.

Confirming that the Power Is On

2.

Load paper.

Loading Paper

3.

Connect the PictBridge compliant device to the machine.

Detect the machine with the PictBridge compliant device and connect the PictBridge compliant device
to the machine with LAN.

Note

For details on how to detect the machine, refer to your PictBridge compliant device's instruction

manual.

4.

Specify the print settings such as the paper type and layout.

You can perform settings using the menu on the LCD of your PictBridge compliant device. Select the
size and type of paper that you loaded in the machine.

Settings on a PictBridge Compliant Device

If your PictBridge compliant device does not have a setting menu, change the setting from the
machine.

Settings on the Machine

Note

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands