manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 693

Registering Recipients Using the Operation Panel of the
Machine

Speed dialing allows you to dial fax/telephone numbers by simply pressing a few buttons.

The following speed dialing methods are available:

• Coded Speed Dialing

Registering the recipient's fax/telephone number and name to the coded speed dial allows you to send
a fax by entering the coded speed dial code assigned to that number or using the 

 button to select

the coded speed dial code after pressing the 

Coded Dial

 button.

Registering Recipients to Coded Speed Dial

• Group Dialing

Register two or more registered coded speed dial codes as a group in advance. You can send the
same document to all the registered recipients in the group.

Registering Recipients for Group Dial

You can register up to 20 recipients in total of coded speed dial code and group dial code.

Note

To change information registered to the coded speed dial or the group dial, see 

Changing Registered

Information

.

To delete information registered to the coded speed dial or the group dial, see 

Deleting Registered

Information

.

To print a list of the recipient's fax/telephone numbers and names registered, see 

Printing a List of the

Registered Destinations

.

You can register, change, or delete information registered to the coded speed dial or the group dial

using Speed Dial Utility.

Registering Recipients Using Speed Dial Utility

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands