Canon MX520 series, Online Manual

Page: 410 / 953

The Scan-from-PC Settings screen appears.
3. Select your scanner or printer from Scanners .
Normally, the MAC address of your scanner or printer is already selected after the network setup. In
that case, you do not need to select it again.
Important
If multiple scanners exist on the network, multiple model names appear. In that case, you can
select one scanner per model.
4. Click OK .
Note
The scanner selected in the Scan-from-PC Settings screen will be automatically selected in the Scan-
from-Operation-Panel Settings screen as well.
Setting for Scanning with IJ Scan Utility
To scan from IJ Scan Utility using a scanner or printer connected to a network, specify your scanner or
printer with IJ Network Scanner Selector EX, then follow the steps below to change the connection status
between it and the computer.
1. Start IJ Scan Utility.
Starting IJ Scan Utility
2. Select "Canon XXX series Network" (where "XXX" is the model name) for Product
Name .