Canon MX520 series, Online Manual

Page: 127 / 953

Security control
• FAX number re-entry
If you select ON , you can set the machine to send faxes after using the Numeric buttons to enter the number twice.
By using this setting, you can avoid the mistransmission of faxes.
Preventing Mistransmission of Faxes
• Check RX FAX information
If you select ON , the machine checks whether the recipient's fax machine information matches the dialed number. If it
matches the number, the machine starts to send faxes.
Preventing Mistransmission of Faxes
• Hook key setting
If you select Enable , you can use the Hook button.
• FAX reception reject
If you select ON , the machine rejects the reception of faxes with no sender information or faxes from specific
senders.
Rejecting Fax Reception
• Caller rejection
If you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's ID matches the
condition specified in this setting, the machine rejects the phone call or fax reception from the sender.
If you select
Yes on the subscribing confirmation screen, you can specify the settings of rejection.
Using the Caller ID Service to Reject Calls
Note
This setting may not be supported depending on the country or region of purchase. Contact your telephone
company to confirm whether it provides this service.
Easy setup
The machine must be set up depending on your telephone line and use of the faxing function. Follow the procedure
according to the instructions on the LCD.
Note
You can specify the setup setting individually or the advanced setting.
For details on how to specify the setting:
Preparing for Faxing
127