Canon MX520 series, Online Manual

Page: 126 / 953

If you select Disconnect , the machine does not send color documents when the recipient's fax machine does not
support color faxing.
• RX image reduction
Enables/disables automatic reduction of incoming faxes so that they fit in the selected paper.
If you select
ON , you can select the image reduction direction.
• Adv. communication settings
• ECM TX
Selects whether to send faxes in Error Correction Mode (ECM).
Transmission/Reception of Faxes Using ECM
• ECM RX
Selects whether to receive faxes in Error Correction Mode (ECM).
Transmission/Reception of Faxes Using ECM
• TX start speed
Selects the fax transmission speed.
The fax transmission start speed will be faster as the value is bigger.
When the telephone line condition or connection is poor, selecting a lower transmission start speed may solve
transmission problems.
• RX start speed
Selects the fax reception speed.
The fax reception start speed will be faster as the value is bigger.
When the telephone line condition or connection is poor, selecting a lower reception start speed may solve
reception problems.
Auto print settings
• Received documents
Selects whether to print the received fax automatically when receiving a fax.
If you select
Do not print , the received fax is stored in the machine's memory.
For details on the received fax stored in the machine's memory:
Document Stored in Machine's Memory
• Activity report
Selects whether to print ACTIVITY REPORT automatically.
If you select
Print , the machine prints ACTIVITY REPORT for the 20 histories of sent and received faxes
automatically.
For details on the procedure to print ACTIVITY REPORT manually:
Summary of Reports and Lists
• TX report
Selects whether to print TX REPORT/ERROR TX REPORT automatically after sending a fax.
If you print the report, select
Print error only or Print for each TX .
If you select Print error only or Print for each TX , you can specify the print setting that the first page of the fax is
printed along with the report.
• RX report
Selects whether to print RX REPORT automatically after receiving a fax.
If you print RX REPORT, select
Print error only or Print for each RX .
• Print when out of ink
Sets whether to continue printing the received fax without storing it in the machine's memory when the ink has run
out.
However, part or all of the fax may not be printed since the ink has run out.
Auto save setting
Selects whether to save the received fax on the USB flash drive automatically after receiving a fax.
Saving Received Faxes Automatically on a USB Flash Drive
126