Canon MX490 Series, Online Manual

Page: 680 / 1004

Setting the Telephone Line Type
Before using your machine, make sure you set the correct telephone line type for your telephone line. If you
are unsure of your telephone line type, contact your telephone company. For xDSL or ISDN connections,
contact the telephone company or service provider to confirm your line type.
Important
• For users in China
After plugging the power cord and turning on the machine, the telephone line type is selected
automatically. However, if the machine is connected to the control device such as an xDSL modem or
terminal adapter, the telephone line type may not be selected correctly.
In this case, set the line type manually.
For details on how to set the Telephone line type manually in China:
Setting the Telephone Line Type Manually in China
Note
• Telephone line type will not appear in countries or regions where Rotary pulse is not supported.
• You can print USER'S DATA LIST to check the current setting.
Summary of Reports and Lists
1. Make sure that the machine is turned on.
2. Press the Setup button.
The Setup menu screen is displayed.
3. Use the button to select Fax settings , then press the OK button.
4. Use the button to select FAX user settings , then press the OK button.
5. Use the button to select Telephone line type , then press the OK button.
6. Use the button to select a telephone line type, then press the OK button.
Rotary pulse
Select when your telephone line type is pulse dialing.
Touch tone
Select when your telephone line type is tone dialing.
Note
• The * (asterisk) on the LCD indicates the current setting.
7. Press the FAX button to return to the Fax standby screen.
680