manualshive.com logo in svg

Canon MX450 series, Online Manual, Page: 91 / 868

Share
Download
Canon MX450 series Online Manual Download Page 91

A transaction number from "0001" to "4999" indicates a document being sent. A transaction

number from "5001" to "9999" indicates a document being received.

Each mark before the transaction number indicates the following:

No mark: Indicates a black and white document.

: Indicates a color document.

: Indicates the document during transmission.

: Indicates the document sent with sequential broadcasting.

By pressing the 

 button or the 

Tone

 button, the transaction number displayed on the LCD is

switched to transaction time or fax/telephone number.

7.

Use the 

 button to select the transaction number (TX/RX no.) of the document you want to save,

then press the 

OK

 button.

The specified document is saved on the USB flash drive.

Note

If there is not the specified document in the machine's memory, 

No document

 is displayed, and

the machine returns to the previous screen.

To return to the Fax standby screen, press the 

Stop

 button.

Saving All the Received Documents in Machine's Memory to USB Flash Drive

Save all the received documents in the machine's memory to the USB flash drive following the procedure
below.

1.

Make sure that the machine is turned on.

Confirming that the Power Is On

2.

Insert the USB flash drive into the USB flash drive port.

Inserting the USB Flash Drive

3.

Press the 

FAX

 button.

The Fax standby screen is displayed.

4.

Press the 

Menu

 button.

The 

FAX menu

 screen is displayed.

5.

Use the 

 button to select 

Memory reference

, then press the 

OK

 button.

Note

If no document is stored in the machine's memory, 

No documents in memory

 is displayed on

the LCD.

6.

Use the 

 button to select 

Save all documents

, then press the 

OK

 button.

7.

Use the 

 button to select 

Yes

, then press the 

OK

 button.

All the documents in the machine's memory will be saved to the USB flash drive.

Note

You can save up to 50 pages of fax as one PDF file.
You can save up to 2000 PDF files on a USB flash drive.
Faxes are saved according to the order of the transaction number when 

Save all documents

 is

selected.

If the USB flash drive is removed or becomes full while saving faxes is in progress, the error message

is displayed on the LCD. Press the 

OK

 button to dismiss the error.

The folder and file name of faxes saved on the USB flash drive is as follows:

Folder name: CANON_SC\FAXDOC\0001

Summary of Contents for MX450 series





































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments