manualshive.com logo in svg

Canon MX450 series, Online Manual

Share
Download
Canon MX450 series Online Manual Download Page 767

Printing Does Not Start

•

Check 1: Is Bluetooth unit ready for use?

Make sure that the 

Bluetooth settings

 (Graphic LCD)/

Bluetooth settings

 (Text LCD) screen

can be displayed on the LCD of the printer. If the screen cannot be displayed, remove the
Bluetooth unit from the printer and attach it once again.

Attaching to and Removing from the Printer

Make sure that the 

Bluetooth settings

 (Graphic LCD)/

Bluetooth settings

 (Text LCD) screen

can be displayed on the LCD of the printer, and try to print again.

If the 

Bluetooth settings

 (Graphic LCD)/

Bluetooth settings

 (Text LCD) screen is not yet

displayed after you remove the Bluetooth unit from the printer and attach it again, the Bluetooth
unit may be faulty. In this case, contact the service center.

•

Check 2: Is there a problem with the location of the printer or is the

distance between the printer and computer too great?

The maximum communication distance between the printer and a computer is about 33 ft./10 m,
but it varies depending on the following conditions:

• Presence of obstacles between the communication equipment and radio wave conditions
• Location where magnetic fields, static electricity, or radio interference occurs
• Type of software and operating system used
• Receiver sensitivity and antenna performance of the communication equipment

Change the printer installation place or move the printer closer to the computer.

•

Check 3: Is the printer to be used selected correctly?

Follow the procedure described below to select the printer to which the Bluetooth unit is
attached.

1.

Log into a user account with the administrator privilege.

2.

Select items from 

Control Panel

 as shown below.

•

In Windows 7, click 

Control Panel

, then 

Devices and Printers

 under 

Hardware and

Sound

.

•

In Windows Vista, click 

Control Panel

, then 

Printers

 under 

Hardware and Sound

.

•

In Windows XP, click 

Control Panel

, then 

Printers and Faxes

 under 

Printers and

Other Hardware

.

3.

Click the 

 icon of the printer to be used for printing via Bluetooth communication.

By default, the icon name is "Canon XXX Printer (Copy X)".

Note

"X" is a device name or a digit. The number of digits may differ depending on the

printer.

4.

Select the printer properties.

•

In Windows 7, select 

Printer properties

.

•

In Windows Vista, select 

Properties

 from the 

Organize

menu.

•

In Windows XP, select 

Properties

 from the 

File

 menu.

5.

Click the 

Ports

 tab and select an applicable printer from 

Port

.

It may vary depending on how you authenticate the printer.
For Windows 7

Summary of Contents for MX450 series





































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands