Changing the Paper Settings
This machine prints received faxes to paper loaded in the machine beforehand. You can use the operation
panel to change the paper settings for printing faxes. Make sure that the settings are appropriate for the
loaded paper.
Important
If the size of loaded paper is different from that specified in the paper size setting, the received faxes
are stored in the machine's memory and
Check page size
and
Press [OK]
are displayed on the LCD.
In this case, load the same size of paper as that specified in the paper size setting, then press the
OK
button.
You can also press the
Stop
button to close the message and print the stored documents in the
machine's memory later.
Printing a Document in Machine's Memory
If no paper is loaded, or paper has run out while printing is in progress, the received faxes are stored
in the machine's memory and
Load paper
and
Load paper and press [OK]
are displayed on the
LCD. In this case, load paper and press the
OK
button.
You can also press the
Stop
button to close the message and print the stored documents in the
machine's memory later.
Printing a Document in Machine's Memory
Note
If the sender sends a document that is larger than Letter-size or Legal-size, such as 11 x 17 inches,
the sender's machine may send the fax automatically reduced in size or divided, or send only a part of
the original.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Press the
FAX
button.
The Fax standby screen is displayed.
3.
Press the
Menu
button.
The
FAX menu
screen is displayed.
4.
Use the
button to select
FAX paper settings
, then press the
OK
button.
5.
Make sure that
Page size
is selected, then press the
OK
button.
6.
Use the
button to select
A4
,
Letter
,
LTR
, or
Legal
, then press the
OK
button.
Note
The * (asterisk) on the LCD indicates the current setting.
Some of page sizes are not available depending on the country or region of purchase.
7.
Make sure that
Media type
is selected, then press the
OK
button.
8.
Make sure that
Plain paper
is selected, then press the
OK
button.
Note
If any media type other than
Plain paper
is selected, select
Plain paper
using the
button,
then press the
OK
button.
9.
Press the
FAX
button to return to the Fax standby screen.
Summary of Contents for MX450 series
