Canon MX450 series Online Manual Download Page 420

Page: 420 / 868

Search Screen

Note

This screen is not available depending on the printer you are using.

The access points detected are listed.

Detected Access Points:

The signal strength from the access point, encryption type, name of access point, and the radio channel can be
confirmed.

Important

If you connect to a network that is not protected with security measures, there is a risk of disclosing data such

as your personal information to a third party.

Note

Signal strength is displayed as follows.

: Good
: Fair
: Poor

Type of encryption is displayed as follows.

Blank: No encryption

WEP

: WEP is set

WPA

: WPA is set

WPA2

: WPA2 is set

Update

Click to update the list of access points when your target access point is not detected.
If the target access point is set to the stealth mode, click

Cancel

to return to the previous screen and enter the access

point's Service Set Identifier in

SSID:

on the

Wireless LAN

sheet.

Wireless LAN Sheet

Note

When detecting your target access point, make sure that the access point is turned on.

Set

Click to set the access point's SSID in

SSID:

on the

Wireless LAN

sheet.

Note

The

WEP Details

screen, the

WPA Details

screen, or the

WPA2 Details

screen appears if the selected access

point is encrypted. In this case, configure the details to use the same encryption settings set to the access point.

Access points that cannot be used by this machine (including those configured to use different encryption

methods) are displayed grayed out and cannot be configured.

162

Summary of Contents for MX450 series





































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX450 series

Reviews:

Related manuals for MX450 series

Brands by name

Popular brands

Canon MX450 series, Online Manual

Search results

Summary of Contents for MX450 series

Reviews:

Related manuals for MX450 series

Brands by name

Popular brands