manualshive.com logo in svg

Canon MX450 series, Online Manual, Page: 377 / 868

Share
Download
Canon MX450 series Online Manual Download Page 377

If you select 

ON

, the machine transmits the fax after confirming the dial tone.

Note

This setting may not be available depending on the country or region of purchase.

•

Pause time settings

Sets the length of pause time for each when you enter "P" (pause).

•

TTI position

Selects the position of the sender information (outside or inside the image area).

•

Remote RX

Enables/disables remote reception.
If you select 

ON

, you can specify the remote reception ID.

Remote Reception

•

Color transmission

When faxing color documents using the ADF, selects whether to convert them into black & white data if the recipient's
fax machine does not support color faxing.
If you select 

If incompatible, end

, the machine does not send color documents when the recipient's fax machine

does not support color faxing.

•

RX image reduction

Enables/disables automatic reduction of incoming faxes so that they fit in the selected paper.
If you select 

ON

, you can select the image reduction direction.

•

Adv. communication

•

ECM TX

Selects whether to send faxes in Error Correction Mode (ECM).

Transmission/Reception of Faxes Using ECM

•

ECM RX

Selects whether to receive faxes in Error Correction Mode (ECM).

Transmission/Reception of Faxes Using ECM

•

TX start speed

Selects the fax transmission speed.
Ex:

The following settings are available.

33600 bps

/

14400 bps

/

9600 bps

/

4800 bps

The * (asterisk) on the LCD indicates the current setting.
The fax transmission start speed will be faster as the value is bigger.
Some of settings are not available depending on the country or region of purchase.
When the telephone line condition or connection is poor, selecting a lower transmission start speed may solve
transmission problems.

•

RX start speed

Selects the fax reception speed.
Ex:

The following settings are available.

33600 bps

/

14400 bps

/

9600 bps

/

4800 bps

The * (asterisk) on the LCD indicates the current setting.
The fax reception start speed will be faster as the value is bigger.
Some of settings are not available depending on the country or region of purchase.
When the telephone line condition or connection is poor, selecting a lower reception start speed may solve
reception problems.

Auto print settings

•

Received documents

119

Summary of Contents for MX450 series





































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments