Canon MX450 series Online Manual Download Page 17

Page: 17 / 868

Use the

button to select

Dev. user settings

, then press the

button.

Use the

button to select

Date/time setting

, then press the

button.

Set the date and time.

Use the

button to move the cursor under the desired position, then use the Numeric buttons to

enter the date and time.

Enter the date and time in 24-hour format.
Enter only the last two digits of the year.

Press the

button.

Press the

FAX

button to return to the Fax standby screen.

Setting Daylight Saving Time (Summer Time)

Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at
certain periods of the year.

You can set your machine to automatically change the time by registering the date and time that daylight
saving time (summer time) begins and ends.

Important

Not all the latest information of all countries or regions is applied for

Summer time setting

by default.

You need to change the default setting according to the latest information of your country or region.

Note

This setting may not be available depending on the country or region of purchase.

Make sure that the machine is turned on.

Confirming that the Power Is On

Press the

Setup

button.

The

Setup menu

screen is displayed.

Use the

button to select

Device settings

, then press the

button.

Use the

button to select

Dev. user settings

, then press the

button.

Use the

button to select

Summer time setting

, then press the

button.

Use the

button to select

, then press the

button.

To disable summer time, select

OFF

Set the date and time when summer time starts.

1. Use the

button to select

Start date/time

, then press the

button.

2. Make sure that

Set month

is selected, then press the

button.

3. Use the

button to select the month when summer time starts, then press the

button.

4. Make sure that

Set week

is selected, then press the

button.

5. Use the

button to select the week when summer time starts, then press the

button.

6. Make sure that

Set day of week

is selected, then press the

button.

Summary of Contents for MX450 series





































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX450 series

Reviews:

Related manuals for MX450 series

Brands by name

Popular brands

Canon MX450 series, Online Manual

Search results

Summary of Contents for MX450 series

Reviews:

Related manuals for MX450 series

Brands by name

Popular brands