Canon MX390 series Online Manual Download Page 97

Page: 97 / 170

Adjusting Saturation and Color Balance

In ScanGear (scanner driver)'s

Advanced Mode

tab, click

(Saturation/Color Balance).

Note

Click

Defaults

to reset all adjustments in the current window.

Saturation

Adjust the image's saturation (vividness). You can brighten colors that have faded with time, etc.

Move

(Slider) under

Saturation

to the left to decrease the saturation (darken the image), and to the

right to increase the saturation (brighten the image). You can also enter a value (-127 to 127).

Saturation decreased

Original image

Saturation increased

Note

The natural color tone of the original image may be lost if you increase saturation too much.

Color Balance

Adjust images that have a colorcast. "Colorcast" is a phenomenon where a specific color affects the entire
picture due to the weather or ambient strong colors.

Move

(Slider) under

Color Balance

to the left or right to emphasize the corresponding color.

Cyan & Red
Magenta & Green
Yellow & Blue

Summary of Contents for MX390 series











































































































































































Search results

Summary of Contents for MX390 series

Reviews:

Related manuals for MX390 series

Brands by name

Popular brands

Canon MX390 series, Online Manual

Search results

Summary of Contents for MX390 series

Reviews:

Related manuals for MX390 series

Brands by name

Popular brands