Canon MVX430 Instruction Manual Download

Page: 41 / 129

ic Fu

nc
ti

Pla

Playing Back on a TV Screen

Selecting the Type of TV

During playback, set the [TV TYPE] option according to the TV set to which you connect
the camcorder.

Available only in

the

mode.

1. Press the FUNC. button to open the FUNC. menu.

2. With the joystick select (

) the

icon and press (

3. Select (

) the [VCR SETUP] menu and press (

). Then, select (

)

the [TV TYPE] option and press (

4. Select a setting option and press (

) to save the changes.

• [WIDE TV]: TV sets with 16:9 aspect ratio.
• [NORMAL TV]: TV sets with 4:3 aspect ratio.

5. Press the FUNC. button to close the menu.

TVs with SCART Terminal

Refer also to the TV or VCR instruction manual.

1. Turn off all devices before starting the connections.

2. Connect the PC-A10 SCART Adapter to the TV or VCR’s terminals.

(

63)

VCR SETUP

TV TYPE WIDE TV

STV-250N Stereo Video
Cable (supplied)

PC-A10 SCART
Adapter

Signal flow

Open the
terminal cover

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for MVX430


































































































































Search results

Summary of Contents for MVX430

Reviews:

Related manuals for MVX430

Brands by name

Popular brands

Canon MVX430, Instruction Manual

Search results

Summary of Contents for MVX430

Reviews:

Related manuals for MVX430

Brands by name

Popular brands