Canon MVX 1i Instruction Manual Download

Page: 40 / 146

Advanced Functions

Recording Programs

Using the Recording Programs

Auto

The camcorder adjusts focus, exposure and
other settings automatically, allowing you to
just point and shoot.

Portrait

The camcorder uses a large
aperture, achieving a focus
on the subject while blurring
other distracting details.

Snow

Use this mode to record in
bright ski resorts. It prevents
the subject from being
underexposed.

Spotlight

Use this mode to record
spotlit scenes.

Sports

Use this mode to record
sports scenes such as tennis
or golf.

Beach

Use this mode to record on a
sunny beach. It prevents the
subject from being
underexposed

Fireworks

Use this mode to record
fireworks.

Night

Use this mode to record in
dimly lit places (

41).

Sunset

Use this mode to record
sunsets for vibrant colors.

Program AE (

43)

Shutter-Priority AE (

44)

Aperture-Priority AE (

45)

Summary of Contents for MVX 1i



















































































































































Search results

Summary of Contents for MVX 1i

Reviews:

Related manuals for MVX 1i

Brands by name

Popular brands

Canon MVX 1i, Instruction Manual

Search results

Summary of Contents for MVX 1i

Reviews:

Related manuals for MVX 1i

Brands by name

Popular brands