Canon MVX 1i Instruction Manual Download

Page: 39 / 146

Basic Fun

ions

ayback

TVs without SCART terminal

Refer also to the TV or VCR instruction manual.

1. Turn off all devices before starting the connections.
2. Connect the MTC-100 Multi Cable to the camcorder’s AV terminal and

the audio terminals on the TV/VCR.

Connect the white plug to the white audio terminal L (left), the red plug to the red audio
terminal R (right).

3. Connect the MTC-100 Multi Cable to the video terminal on the TV/VCR.

If your TV or VCR has an S-Video or (S1)-Video input, connect the multi cable to the S
(S1)-VIDEO terminal and do not connect the yellow plug. Otherwise, connect the
yellow plug to the yellow video terminal (VIDEO).

4. If connecting to a TV, set the input selector to VIDEO. If connecting to

a VCR, set the input selector to LINE.

We recommend powering the camcorder from a household power source.

The picture quality is higher when connecting to a TV with an S (S1) terminal.

VIDEO

S(S1)-VIDEO

AUDIO

VIDEO

AUDIO

INPUT

TVs or VCRs with S- (S1)-
Video Input Terminals

MTC-100
Multi Cable
(supplied)

Signal flow

TVs or VCRs with Audio/
Video Terminals

Open the
terminal
cover

Summary of Contents for MVX 1i



















































































































































Search results

Summary of Contents for MVX 1i

Reviews:

Related manuals for MVX 1i

Brands by name

Popular brands

Canon MVX 1i, Instruction Manual

Search results

Summary of Contents for MVX 1i

Reviews:

Related manuals for MVX 1i

Brands by name

Popular brands