Canon MVX 1i Instruction Manual Download Page 18

Page: 18 / 146

Step 3: Inserting a Memory Card

This camcorder is for use only with miniSD cards.

Inserting the Card

1. Set the power switch to OFF.
2. Open the cover.
3. Insert the memory card straight all

the way into the memory card slot.

4. Close the cover.

Do not close the cover forcefully without
having the card correctly inserted.

Removing the Card

Do not forcefully remove the memory card without first pushing it in.

1. Turn off the camcorder.

Make sure that the card access indicator
is not flashing before you turn off the
camcorder.

2. Open the cover.
3. Push the memory card to release

it. Remove the memory card.

4. Close the cover.

If you use memory cards other than the supplied one, make sure to format them
with the camcorder (

92).

Proper operation cannot be guaranteed for all memory cards.

Card access
indicator

Summary of Contents for MVX 1i



















































































































































Search results

Summary of Contents for MVX 1i

Reviews:

Related manuals for MVX 1i

Brands by name

Popular brands

Canon MVX 1i, Instruction Manual

Search results

Summary of Contents for MVX 1i

Reviews:

Related manuals for MVX 1i

Brands by name

Popular brands