Canon MVX 1i Instruction Manual Download

Page: 17 / 146

ep
ar

ati
o

Step 2: Loading a Cassette

Use only videocassettes marked with the

logo.

1. Slide the OPEN/EJECT switch and

open the cassette compartment
cover.

The cassette compartment opens
automatically.

2. Load the cassette.

• Load the cassette with the window

facing the grip belt.

• Unload the cassette by pulling it straight

out.

3. Press the

mark on the

cassette compartment until it
clicks.

4. Wait for the cassette compartment

to retract automatically and close
the cassette compartment cover.

Do not interfere with the cassette compartment while it is opening or closing
automatically, or attempt to close the cover before the cassette compartment
has fully retracted.

Be careful not to get your fingers caught in the cassette compartment cover.

If the camcorder is connected to a power source, cassettes can be loaded/
unloaded even if the power switch is set to OFF.

Summary of Contents for MVX 1i



















































































































































Search results

Summary of Contents for MVX 1i

Reviews:

Related manuals for MVX 1i

Brands by name

Popular brands

Canon MVX 1i, Instruction Manual

Search results

Summary of Contents for MVX 1i

Reviews:

Related manuals for MVX 1i

Brands by name

Popular brands