Canon MultiPASS MP390 User Manual Download Page 91

Page: 91 / 187

Chapter 9

Preparing Your Machine For Fax

Changing Or Deleting An Entry

Follow this procedure:

To change a registered number:

1. Follow the procedures from step 1 to 5 under “Registering Directory

Dialing.”

2. Use [

] to delete the registered number.

3. Use the numeric keys to enter the new number.

NOTE

For details on how to enter or delete characters, see page 85.

4. Press [Set].

5. Press [Stop/Reset].

To change a registered name:

1. Follow the procedures from step 1 to 4 under “Registering Directory

Dialing.”

2. Press [Set] four times.

3. Press and hold [

] to delete the registered name.

4. Use the numeric keys to enter the new name.

NOTE

For details on how to enter or delete characters, see page 85.

5. Press [Set].

6. Press [Stop/Reset].

To delete an entire entry:

1. Follow the procedures from step 1 to 5 under “Registering Directory

Dialing.”

2. Press and hold [

] to clear the registered number.

3. Press [Set].

4. Press [Stop/Reset].

The name will automatically be deleted when you delete the number.

Summary of Contents for MultiPASS MP390




























































































































































































Search results

Summary of Contents for MultiPASS MP390

Reviews:

Canon MultiPASS MP390, User Manual, Page: 91 / 187

Search results

Summary of Contents for MultiPASS MP390

Reviews: