Canon MultiPASS MP390 User Manual Download Page 79

Page: 79 / 187

Chapter 7

Printing From Your Computer

Changing Print Settings With The Print Advisor

Follow this procedure:

Changing Print Settings Manually

Follow this procedure:

Open the document in the application software, and select the command
to print.

This in most cases will be [Print] in the [File] menu or toolbar.

In the [Print] dialog box, click [Properties].

In the [Properties] dialog box, on the
[Main] tab, click [Print Advisor].

Follow the instructions on the screen.

Open the document in the application software, and select the command
to print.

This in most cases will be [Print] in the [File] menu or toolbar.

In the [Print] dialog box, click [Properties].

In the [Properties] dialog box, change the settings on the relevant tab or
screen.

To restore the original settings after changing them, click [Defaults].

Confirm, then click [OK] to apply the changes and close the dialog box.

• The changes are applied to the settings, and the dialog box closes.
• To cancel changing the settings and close the dialog box, click [Cancel].

Summary of Contents for MultiPASS MP390




























































































































































































Search results

Summary of Contents for MultiPASS MP390

Reviews:

Canon MultiPASS MP390, User Manual, Page: 79 / 187

Search results

Summary of Contents for MultiPASS MP390

Reviews: