Canon MultiPASS MP390 User Manual Download Page 151

Page: 151 / 187

Chapter 14

Appendix

149

Chapter

Appendix

This section describes how to change the machine settings, and provides a description of each
setting item.

How To Change Settings And Explanation Of Their Content

Before changing any settings, you can print the USER’S DATA LIST to check the current settings
of your machine. For details, see page 94.

Accessing The Machine Settings

Follow this procedure to change the settings of each mode:

Refer to the function lists on the following pages to find the setting you
want to change.

If there is a reference for the
setting

, refer to that page for

more details. If not, confirm the
function key

and menu

the top of the list where the
setting and the description of
the setting are located.

Press [COPY], [FAX], [PHOTO PRINT] or [Additional Functions],
depending on the function key

If you press [COPY], [FAX] or [PHOTO PRINT]:

1. Press [Menu] repeatedly until the menu

2. Use [

] or [

] to select the setting you want to change.

3. Go to step 4.

Summary of Contents for MultiPASS MP390




























































































































































































Search results

Summary of Contents for MultiPASS MP390

Reviews:

Canon MultiPASS MP390, User Manual, Page: 151 / 187

Search results

Summary of Contents for MultiPASS MP390

Reviews: