manualshive.com logo in svg

Canon MultiPASS MP390, User Manual, Page: 138 / 187

Share
Download
Canon MultiPASS MP390 User Manual Download Page 138

136

Troubleshooting

Chapter 13

Repeated Errors Occur When You Receive A Fax

X

Problems Sending Faxes

Cannot Send A Fax

Cannot Send A Fax Clearly

Cause

Action

The reception start speed <

RX 

START SPEED

> is set to 

33600bps.

Reduce the reception start speed (see page 156). If there is a bad line 
or connection, reducing the reception start speed may correct the 
error.

The sender’s fax machine is not 
operating normally.

Contact the sender and check whether his/her fax machine is 
operating normally.

Cause

Action

The Alarm lamp is flashing. 

If it is flashing, see 

“When The Alarm Lamp Flashes,”

 on page 127.

The telephone line is connected to 
the  

jack.

Reconnect to the 

 jack (see page 82). When the telephone line is 

correctly connected to the machine, the machine stops making 
noises. If you do not hear anything, there is a problem with the 
telephone line. Contact your telephone company.

The telephone line type is not set 
correctly.

You can still receive faxes even if the telephone line type is not set 
correctly. If you can receive but cannot send, check the telephone 
line type setting. (See page 83)

The fax number is not registered 
correctly in the directory.

If you are using directory dialing, check that the fax number is 
correctly registered. (See page 90)

The dialed number is wrong.

Check the number and try dialing again.

There was an error during 
transmission.

• Check the LCD for an error message. (See page 143)
• Print the ACTIVITY REPORT and check for an error. (See 

page 94)

The recipient’s fax machine is not 
G3-compatible.

Check that the recipient’s fax machine is G3-compatible. If not, you 
will be unable to send faxes.

Cause

Action

The document is not loaded 
correctly, or the platen glass or the 
inner side of the document cover is 
dirty.

• Check that the document is loaded correctly on the platen glass. 

(See page 19)

• Try making a copy. If you can make a clean copy, it is probably that 

the recipient’s fax machine is the source of the problem. Contact the 
recipient to confirm. If you are unable to make a clean copy, clean 
the machine. (See page 121)

The image quality displayed on the 
LCD is not suitable for the 
document.

Set an image quality suitable for the document. (See page 97)

The scan contrast is not suitable for 
the document.

Set the scan contrast suitable for the document. (See page 97)

FAX

FAX

FAX

FAX

Summary of Contents for MultiPASS MP390




























































































































































































Reviews:

No comments