manualshive.com logo in svg

Canon MultiPASS MP390, User Manual, Page: 137 / 187

Share
Download
Canon MultiPASS MP390 User Manual Download Page 137

Chapter 13

Troubleshooting

135

Cannot Receive Faxes Automatically

Machine Does Not Switch Automatically Between Voice And 

Fax Calls

Quality Of Received Fax Is Poor

Cannot Receive A Fax Using Error Correction Mode (ECM) 

Method

Cause

Action

The receive mode displayed on the 
bottom left of the LCD is not 
<

FaxTel

>, <

FaxOnly

>, 

<

DRPD

>, or <

AnsMode

>.

If <Manual> is displayed, you cannot receive faxes unless you pick 
up the handset and either press [Color] or [Black], or dial the remote 
receiving ID.
If you want to receive faxes automatically, which means not having 
to do anything when you are sent a fax, set the receive mode to 
<

FAX/TEL AUTO SW

>, <

FAX ONLY MODE

>, <

DRPD

>, or 

<

ANS.MACHINE MODE

> (see page 107). If set to 

<

ANS.MACHINE MODE

>, connect an answering machine to the 

machine (see page 82) and check that a message plays when the 
answering machine answers.

Cause

Action

The receive mode displayed on the 
bottom left of the LCD is not 
<

FaxTel

>, <

DRPD

>, or 

<

AnsMode

>.

There will be no automatic switching between voice and fax calls 
unless the receive mode is set to <

FAX/TEL AUTO SW

>, <

DRPD

>, 

or <

ANS.MACHINE MODE

>. If set to <

ANS.MACHINE MODE

>, 

connect an answering machine to the machine (see page 82) and 
check that a message plays when the answering machine answers.

The sender’s fax machine is unable 
to send a CNG signal (the signal 
which indicates that the call is a fax 
call).

Some fax machines are not able to send CNG signals. If so, receive 
the fax manually. (See page 107)

Cause

Action

<

ECM RX

> is set to <

OFF

>.

Set <

ECM RX

> to <

ON

>. (See page 155)

The sender’s fax machine is dirty. The image quality of the fax is mainly determined by the sender’s fax 

machine. Contact the sender and check whether the scanning area  of 
his/her fax machine is dirty.

Cause

Action

<

ECM RX

> is set to <

OFF

>.

Set <

ECM RX

> to <

ON

>. (See page 155)

The sender’s fax machine is not 
ECM-compatible.

If the sender’s fax machine is not ECM-compatible, the fax will be 
received in the standard mode without error correction.

FAX

FAX

FAX

FAX

Summary of Contents for MultiPASS MP390




























































































































































































Reviews:

No comments