manualshive.com logo in svg

Canon MultiPASS MP390, User Manual, Page: 132 / 187

Share
Download
Canon MultiPASS MP390 User Manual Download Page 132

130

Troubleshooting

Chapter 13

Memory Card

X

Memory Card Problems

Memory Card Is Not Recognized

Images On The Memory Card Are Not Recognized 

The platen glass or the inside of the 
document cover is dirty. 

Clean the platen glass and the inside of the document cover. 
(See page 121)

You are copying documents such 
as photographs or illustrations with 
fine mode. 

If you are copying documents with fine mode, processing the data 
will take time, and copying will appear to have stopped. Wait until 
data is processed. If you are copying a document with a large printing 
area (with small margins) or are copying multiple sets, copying may 
stop to allow the ink time to dry. 

Cause

Action

The memory card is not correctly 
inserted into the card slot.

• Reinsert the memory card into the appropriate card slot securely. 

(See page 45)

• Reinsert the memory card into the card slot with its front side 

(labeled side) facing outside. (See page 45) 

The xD-Picture Card is directly 
inserted into the card slot. 

Remove the memory card, insert it into the CompactFlash card 
adapter correctly, and insert the CompactFlash card adapter into the 
card slot. (See page 45) 

The memory card or the 
CompactFlash card adapter (in 
case of xD-Picture Card) is 
defective. 

Try another memory card, as the first memory card may be damaged. 
In this case, reformat the memory card with the digital camera. When 
you reformat the memory card with the digital camera, all the data on 
the memory card will be deleted. If you can read image data on the 
computer, reformat the memory card after you have backed up the 
image data. 
If you still have problems with another memory card, the 
CompactFlash card adapter may be defective, or the card is not 
operating correctly with the machine.

Cause

Action

There is no image on the memory 
card.

Check if there is any image data on the memory card using your 
digital camera or computer. 

The machine does not support the 
file format.

The machine does not support file formats other than JPEG (DCF/
CIFF/Exif2.2 or earlier/JFIF) format. For a file format other than 
JPEG, print the images from your computer.

There is some invalid image data 
on the memory card.

If < 

NO FILES ON CARD

> is displayed on the LCD, there are only 

invalid images on the memory card. If a message is displayed, 
see page 146.

Cause

Action

Summary of Contents for MultiPASS MP390




























































































































































































Reviews:

No comments