manualshive.com logo in svg

Canon MultiPASS F60, Software User'S Manual, Page: 168 / 206

Share
Download
Canon MultiPASS F60 Software User'S Manual Download Page 168

162   Fine-tuning the MultiPASS Suite

Chapter 7

Removing the MultiPASS Suite

6

If you are planning on reinstalling the MultiPASS Suite, you must first 
remove the current installation of the software. 

If you are using Windows 2000/XP, you must log on as a member of the 
Administrator group to remove the MultiPASS Suite software.

When you remove the MultiPASS Suite, all the software components 
(such as the printer and fax drivers) are automatically removed. 

To remove the MultiPASS Suite:

1.

Close the MultiPASS Suite and all of its components, including the 

Toolbar and Status Monitor. 

Be sure to close, and not just minimize, the Toolbar and Status 
Monitor. To close the Toolbar, right-click the Toolbar icon on the 
Windows taskbar, and then click Exit MultiPASS Toolbar on the 
Toolbar menu.

2.

On the Windows desktop, click Start, point to Settings, and then click 

Control Panel (in Windows XP, click Start, and then click Control 
Panel).

3.

In Control Panel, double-click Add/Remove Programs (in Windows 

XP, click Add or Remove Programs).

4.

In the Add/Remove Programs Properties dialog box (in Windows 

XP, the Add or Remove Programs Properties dialog box), click 
MultiPASS Suite, and then click the Add/Remove button (Windows 
98/Me) or the Change/Remove button (Windows 2000/XP).

5.

Follow the on-screen instructions.

When prompted, click Remove to remove the MultiPASS Suite.

6.

If prompted when the removal process is complete, restart your PC.

Summary of Contents for MultiPASS F60















































































































































































































Reviews:

No comments