manualshive.com logo in svg

Canon MultiPASS F60, Software User'S Manual, Page: 139 / 206

Share
Download
Canon MultiPASS F60 Software User'S Manual Download Page 139

Chapter 6

Viewing and Enhancing Images   133

•

CCITT Group 4

Click to compress the file more than CCITT Group 3. Use this 
technique if you want to achieve the same goals as CCITT Group 
3, while compressing the image more.

•

Deflate

Click if your image contains large areas of a single color. This 
technique is supported by the PDF file format, but is not 
supported by all .tif file format readers.

•

JPEG

Click for continuous-tone images (such as photographs) that you 
want to compress, but save in the .tif file format. This technique is 
supported by both the PDF and PostScript language file formats.

2.

Click Save These Settings as the Defaults if you always want .tif 

images saved in these settings.

Specifying Viewer Preferences

6

You can set the Viewer window and photo editor preferences. You can 
also set the current document as the desktop wallpaper.

If desired, you can make the Viewer the default viewing application for 
some image types, such as jpg or tiff. When you open an image of the 
specified type located anywhere on your system, it opens in the Viewer.

To specify and save Viewer window options:

1.

On the Viewer toolbar or Tools menu, click Options.

Summary of Contents for MultiPASS F60















































































































































































































Reviews:

No comments