manualshive.com logo in svg

Canon MultiPASS F60, Software User'S Manual, Page: 104 / 206

Share
Download
Canon MultiPASS F60 Software User'S Manual Download Page 104

98   Scanning

Chapter 5

6.

With your document in the printer, click Scan to perform the final 

scan of your image.

Defining Preview Scan Settings in Simple Mode

6

Simple Mode enables you to use a more simplified screen, providing 
basic but fewer choices, in defining the scan settings for the preview 
image. You choose an image type that determines the predefined color 
mode and resolution for scanning your image. You can define and delete 
custom image types as needed.

To define preview scan settings in Simple Mode: 

1.

On the Simple Mode tab, in the Image Type box, click the type of 

image you are scanning, which automatically sets the color mode and 
resolution.

2.

In the Paper Size list, click the size of the source document or image 

you are scanning.

Summary of Contents for MultiPASS F60















































































































































































































Reviews:

No comments