Canon MultiPASS C50 Service Manual Download Page 98

Page: 98 / 272

5. BJ CARTRIDGE

This model accepts three types of BJ cartridges, the BC-20, BC-21 and BC-22.

5.1 Structure

a) BC-20 Black BJ cartridge structure

The black BJ cartridge contains a 360 dpi

128 nozzle bubble jet print head unit, on-demand thermal ink

jet type, containing 44 ml of ink. The black ink contained in the ink sponge is filtered with a meshed ink

filter to remove dust, and sucked into bubble jet print head unit through a joint pipe.

b) BC-21 Color BJ cartridge structure

The color BJ cartridge has a printing head equipped with 360 dpi

136 nozzles through which the four

ink colors are ejected (24 nozzles each for yellow, magenta, and cyan; 64 nozzles for black). The ink

cartridge (one for black and one for the other three colors) are removable and replaceable. The BCI-20

black ink tank contains 9 ml of black ink. The BCI-21 color ink tank contains 5 ml each of yellow, cyan,

and magenta ink.

c) BC-22 Photo Color BJ cartridge structure

The photo color BJ cartridge has a printing head equipped with 360 dpi

136 nozzles through which the

four ink colors are ejected (24 nozzles each for yellow, magenta, and cyan; 64 nozzles for black). The BJ

cartridge contains 9 ml of black ink , 5 ml each of yellow, cyan and magenta ink.

For details on the structure of the Bubble jet head unit structure (Printing mechanism),

INKSAVER (economy) printing, and maintenance jet, see the

FACSIMILE

BASIC•INTER SUPPLEMENT 2 (supplied separately)

Using BC-21e/ BC-22e BJ cartridge

BC-21e and BC-22e BJ cartridges are improved versions of BC-21 and BC-22

cartridges, respectively. They are designed to be backward compatible with existing

machines which use the BC-21 or BC-22; therefore, they can be used with this

machine, although full use of their new features is not possible.

Part 1: Facsimile

2-18

REFERENCE

NOTE

Summary of Contents for MultiPASS C50

















































































































































































































































































Search results

Summary of Contents for MultiPASS C50

Reviews:

Related manuals for MultiPASS C50

Brands by name

Popular brands

Canon MultiPASS C50, Service Manual

Search results

Summary of Contents for MultiPASS C50

Reviews:

Related manuals for MultiPASS C50

Brands by name

Popular brands