Continued on the following page >>
– 3 –
2. Edit Exposure Mode Settings
2.1 Procedures to Set Exposure Mode
1
Display the Edit Exposure Mode screen
On the Exposure screen, touch the followings:
[SYSTEM] > [EDIT EXPOSURE MODE]
Edit Exposure Mode Screen
2
Select the Sensor Unit
If two or more sensor units are being used in the system, touch the
Sensor Unit
button,
then select the Sensor Unit.
3
Select the Category tab
If eight or more categories are registered in the system, touch the or button to dis-
play the Category tabs that are not currently visible.
Sensor Unit
Button
Button
Button
Category Tab
Exposure Mode
