Canon MK3000 User Manual Download Page 153

Page: 153 / 203

149

Cleaning the Printer

Cleaning the Outside of the Printer

Wipe the surface of the printer periodically to keep it clean.

WARNING

• Before cleaning, be sure to turn off the power and unplug the power supply. Also,

remove the batteries from the printer. Doing so may result in fi re or electric shock.

• Do not use alcohol, thinner, or other fl ammable solvents to clean the unit. Doing so

may result in fi re or electric shock.

Turn off the power and unplug the power plug from the power outlet.

If batteries are being used, remove them.

Wipe the surface of the printer.

Wipe the printer with a cloth moistened with water and wrung out tightly. Use a lint-free
cloth.

Allow the water to dry completely before proceeding to the next step.

Insert the power plug into the outlet and turn on the power.

Summary of Contents for MK3000












































































































































































































Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands

Canon MK3000, User Manual

Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands